Welcome, GuestSign InSign Up
Position - - / - - Detail

Brick plaster mesh

Trade Leads Details

Building Materials/Expanded Metal, Mesh & Lath
Brickwork Reinforcement Mesh (Ex-Mesh) 3" x 200'
Reinforced brickwork is preferable to un-reinforced brickwork in all types of buildings.
When embedded into the normal thickness of a brickwork-joint at every third joint, it forms an integral structure, which is strengthened against vibration, temperature change and tensional stresses (especially on reclaimed ground).
It is expanded steel mesh with continuity of steel.
It has no joints, welds or interweaving to fail under stress.
The mesh is anchored immovably so that the reinforcement cannot slip under tension.
This is the only type of brickwork reinforcement to give such a unique combination of all these advantages.
Laying Instructions
The mesh should be laid flat and set in the brickwork-joints. The reinforcement must be completely embedded in mortar.
To be assured of its effectiveness, it is normally laid on every third brickwork-joint.
Overlapping must be at least 75mm (3").

Contact Information

Contact PersonChen Wong
Address2-3 East Wire Mesh Industrial Zone, Anping,Hebei,China 053600
About Us - Contact Us - Privacy Policy - Daily Updates - Report Abuse