Welcome, GuestSign InSign Up
Position - - / - - Detail

selling coning oil

TypeSell
RegionChina
Post Time2013-11-13 12:40:05UTC

Trade Leads Details

ANTI-SPLASHING CONNING OIL TF-702T
Main Composition:
Compound of low viscous mineral oil, nonionic/anionic surfactants and special additives.

Technical Index:
Appearance: colorless to slight yellowish transparent viscous liquid
pH(5% aqueous solution): 6.0-8.0
Flash point(open cup): ≥130℃
Density(20℃, g/cm3 ): 0.82-0.88
Dynamic viscosity ( 40℃, mPa .s) 8.0-10.0 (can adjusted according to customers’ demands)
Water content (%) ≤1.3
Emulsifiability (1% aqueous solution) White emulsion
Properties and Features:
1. Low surface tension with excellent penetration and spreading, can be absorbed by filament quickly and evenly, it is easy to control filament oil content.
2. Good bundle-collection, making single threads well-assembled together.
3. Good glidingproperty, high oil film strength, can minimum friction force, effectively avoiding filling and breaking during process.
4. Excellent property of anti-static, can avoid giving birth to static during unwinding and weaving process
5. Easy to be emulsified and cleaned up before dyeing to avoid affecting dyeing and finishing.
6. Low volatility, good and anti-cohesion. Not ready yellowing when stored in room.
7. Excellent properties of low oil splashing, preventing oil dropping and oil mist thus to maintain the cleanness of DTY machine and ambience.
Application:
Suitable for filament oiling of DTY machine with process speed above 700m/min and all kinds of draw and texturing yarn , draw and textured interlaced yarn and colored yarn. Can well-satisfied requirement in subsequent processes.
Application Process:
Can be used directly, no additives are needed, added to filament by lick roller or nozzle. Perfect oil content is available through adjusting.
Packing & Storage:
170kg in one iron drum, can be stored for 6 months under room temperature and hermetic condition.
Notes:
1. Products should avoid suffer too high temperature in Summer and too low temperature in Winter.
2. Do not mix with water and exposed under burning sun.
3. In order to achieve normal effect remember to use diaphragm-pump.
Transfarchem8@163.com

Contact Information

Contact PersonMike Ni
Telephone008657182619289
AddressNo.:58,Jianshe 1st Road,Xiaoshan ETDZ, Hangzhou,Zhejiang,P.R.china
  • High Temperature Antioxidant Thioether and Phenolic Ester Type Antioxidant Richful Lubricant Additives RF1035
  • High Temperature Antioxidant Ester-Phenolic Antioxidant Richful Lubricant Additives RF1135
  • High Temperature Antioxidant P,p'-Dinonyl Diphenylamine Richful Lubricant Additives RF5067
  • High Temperature Antioxidant Butyl Octyl Diphenylamine Richful Lubricant Additives RF5057
  • High Temperature Antioxidant Ashless Antioxidant Richful Lubricant Additives RF3323
  • Ashless Dispersant Raw Material,PIBSA / Polyisobutylene Succinic Anhydride Mn=1300
  • Ashless Dispersant Polymer PIB Succinimide Richful Lubricant Additives RF1161
  • Ashless Dispersant High Nitrogen PIB Succinimide Richful Lubricant Additives RF1146
  • Ashless Dispersant Borated PIB Succinimide Richful Lubricant Additives RF1154B
  • Ashless Dispersant Mono PIB Succinimide Richful Lubricant Additives RF1151
  • TBN300 Alkyl Calcium Salicylate Richful Lubricant Additives RF1109C
  • TBN160 Alkyl Calcium Salicylate T109 Richful Lubricant Additives RF1109B
About Us - Contact Us - Privacy Policy - Daily Updates - Report Abuse