Welcome, GuestSign InSign Up
Position - - / - - Detail

ESG300 electrical swing in bus door system

TypeSell
RegionChina
Post Time2010-09-10 17:54:19UTC

Trade Leads Details

I.Introduction

ESG300 electrical swing in bus door system is mainly used as the entrance and exit doors for BRT buses and low floor buses. The main components such as motor, controller is imported form oversea to ensure the high reliability. The flip mechanism is used at the bottom of door panel to enable the doors widely used in the low floor with angles.

Its main attributes include:
II.Mechanism
Auto-operation
When “OPEN” or “CLOSE” switch is pushed, the motor will be actuated, the rotation motion of motor transfers to door shaft rotation through shaft swing arm on the baseplate. With guide roller which is mounted on the top of door panel moving along the roller channel, the door panel rotates inward or outward to open or close.
Emergency release
In case of emergency, pull the emergency release. Manually push the door panel front edge to open the door.
Sensitive edge
In case the passenger or other items are clamped during the vehicle door closing, the sensitive edge of door panel will be actuated to reverse the motion to open the door.
III Main Parameter
Operation Temperature: -40℃~80℃
Operation Voltage: DC12V or DC24V
Minimum Life Cycle: 250,000
Door closing or opening time:
3-5 seconds
Style: single or double Swing in

Ivy Machinery, the leading bus door system manufacturer in China, we can provide the optimum door system for any vehicle (buses).



Contact Information

Contact Persongrace liu
Telephone86-025-58257300
AddressNo.2, Dahua Road, Zhujiang Industrial Park, Pukou, Nanjing
About Us - Contact Us - Privacy Policy - Daily Updates - Report Abuse