Welcome, GuestSign InSign Up
Position - - / - - Detail

fiber optic patch cord, jumper

Post Time2011-08-21 12:58:55UTC

Trade Leads Details

EasyLink (China Manufacture) provide a variety of custom Simplex, Duplex andMini Zip, single mode (SM) and multi mode (MM) Fiber Patch Cords and Fiberpigtail assemblies that could be built to your specification.
FiberPatch Cord (Fiber Patch Cable or Fiber jumper) is an fiber cable thathas fiber connectors installed on one or both ends. General use of these cableassemblies includes the interconnection of fiber cable systems andoptics-to-electronic equipment.
Fiber pigtail and Fiber patch cord
If the fiberconnectors are attached to only one end of a cable, it is known as a fiberpigtail, if the fiber connectors are attached to both ends. it is known as afiber jumper or fiber patch cord.
Singlemode and Multimode
Single mode fiber patch cord uses9/125um glass fiber, Multimode fiber patch cord uses 50/125um or 62.5/125umglass fiber. Single mode and multimode refer to the fiber cable types. Singlemode Fiber Patch Cord is used in long distance data transmission. MultimodeFiber Patch Cord is use in short distance transmission. Typical singlemode Fiber Patch Cord used yellow fiber cable; Typically multi mode Fiber PatchCord used orange fiber cable.
Cable material and cablediameter
There are various kinds ofFiber cable material for different environment and applications, PVC, Riser,Plenum, OFNR, OFNP, LSZH, 10 Gig Aqua. Typical Fiber cable diameter can be0.25mm, 0.9mm, 2.0mm, 3.0mm.
Simplex and Duplex
Simplex means this FiberPatch Cord is with one cord, at each end is only one fiber connector.Duplex can be regarded as two Fiber Patch Cord put side by side. Duplex FiberPatch Cord usually with Clip on the fiber Connector to combine it.

Contact Information

Contact Personserena yeh
Addressshenzhen city, China
About Us - Contact Us - Privacy Policy - Daily Updates - Report Abuse