Product/Service Details The desander, desilter replacement hydrocyclones. Mud cleaner cones Hydrocyclone cones including 4 desilter cone and large desander cones AHC Hydrocyclone c...

Descriptions: The AJGZ Series Vertical Cutting Dryer uses centrifugal force to dry drilled solids in oil or synthetic base fluids. A stainless steel screen bowl traps “wet” solids and accelerates them up 800RPM.

Mud gun Technique parameters Model NJQ50 Diameter 2 (φ50) Gate valve DN50/PN4.0 Interface diameter 2  Working pressure ≤1.6MPa or higher pressure Nozzles 3 or 1 Swivel Optional...

Descriptions of Submersible Slurry Pump OGEM YZ Submersible slurry pump is centrifugal pump.  It is usually used to pump drilling fluid with larger particle. So it can be treated as shale shaker feeding pump.

Descriptions of Shearing pump JQB Shearing pump is one kind of centrifugal pump. The type is overhead belt drive. This give the pump sufficient power and pressure. During operation...

Descriptions 1.YPD Series flare igniter is used to burn poisonous gas from vent line. 2. It will be connected directly with poor boy degasser vent line. This will prevent blowout a...

Detailed Product Description 1.Require less space also easy to handle 2.High efficiency, low noise, low operating temperature 3.Helical-Bevel gearbox LJB Vertical mud agitator Features 1.

Detailed Product Description 1.Adaptable for different application 2.High efficiency, low noise, low operating temperature 3.Helical-Bevel gearbox Features 1.Typical C face motor installation 2.

Sufficient pressure With valve and shredding knife Venturi type hopper Compact design Descriptions: 1. OGEM mud mixing pump is mainly used to configure or mix drilling fluid according to different drilling well depth.

SB series drilling mud centrifugal pump can be designed from 3x2 to 8x6. Selecting centrifugal pump is according to flow rate demand. Furthermore, the flow rate is related with motor power, head, electric system, the impeller size.

Mud cleaner Descriptions of OGEM Solids Control Mud Cleaner Mud cleaner is combined with Desander/Desilter hydrocyclone and bottom shaker. AJQ Mud cleaner configuration can be customized according to drilling mud capacity requirements.

Hydrocyclone desilter in OGEM Solids Control Detailed Product Description CNQ series desilter is 3rd phase equipments in solids control system. Desilter cone including 4 and 5 mainly separate 12~47μm solid.

Hydrocyclone desander in OGEM Solids Control Descriptions: CSQ Desander separator is 2nd phase mud process equipment in solids control system. The cones size and number can be adjusted according to clients actual capacity requirements.

Descriptions of OGEM Solids Control Shale shaker 1. Shale shaker is the 1st phase solids control equipment. It is mainly used to separate large particle in drilling fluid. Shale s...