Welcome, Guest Sign InSign Up
Product Details
Danfoss Compressor SH105A4ALC
Supply of Danfoss Compressor SH105A4ALC,Danfoss SH105A4ALC,Danfoss Compressor,refrigeration compressor,Compressor Global first-tier brand compressor trading platform which is okmarts.com.
Danfoss Compressor SH105A4ALC
Product details

Approval standardCE
Brand techniqueScroll compressor
Capacity controlFixed speed
Compressor power supply [V/Ph/Hz]400/3/50 460/3/60
Configuration codeSingle
Connection typeBrazed
Diameter [mm]243 mm
Discharge connection height [mm]509 mm
Discharge connection pipe size [in]7/8 in
Discharge connection size [in]7/8 in
Drawing number8560003h
Factory HP [bar]0 bar
Factory LP [bar]0 bar
Fitting standardODF
Frequency [Hz]50/60
Gauge port HPNone
Gauge port LPSchrader
Generation codeC
Glass mountingThreaded
Glass torque [Nm]50 N-m
High side max pressure (Ps)48.7 bar
High Side TS Max150 °C
High Side TS Min-35 °C
High Side Volume0.7 L
High value of nominal voltage at 50Hz [V]400 V
High value of nominal voltage at 60Hz [V]460 V
High value of voltage range at 50Hz [V]440 V
High value of voltage range at 60Hz [V]506 V
IP protection classIP54 (with cable gland)
Low side max pressure (Ps)33.3 bar
Low Side TS Max55 °C
Low Side TS Min-35 °C
Low Side Volume13.6 L
Low value of nominal voltage at 50Hz [V]380 V
Low value of nominal voltage at 60Hz [V]460 V
Low value of voltage range at 50Hz [V]342 V
Low value of voltage range at 60Hz [V]414 V
LRA142 A
Maximum Operating Current [MOC]22 A
Model numberSH105A4ALC
Motor protectionInternal overload protector
Mounting torque [Nm]15 N-m
Nominal cooling capacity 60 kBTU/h109.56 kBtu/h
Nominal cooling capacity at 50Hz23.8 kW
Nominal cooling capacity at 60Hz32.1 kW
Nominal heating capacity at 50Hz23.8 kW
Number of starts per hour [Max]12
Oil charge [L]3.3 L
Oil equalization1-3/4'' Rotolock
Oil reference160SZ
Oil typePOE
Power connectionsScrew 4.8 mm
Refrigerant charge [kg] [Max]7.9 kg
Relief valveNone
RLA17.9 A
Rotational speed at 50Hz [rpm]2900 rpm
Rotational speed at 60Hz [rpm]3500 rpm
Segment usageAir conditioning
Shipped instructionsInstallation instructions
Shipped mountingMounting kit with grommets, bolts, nuts, sleeves and washers
Shipped oilInitial oil charge
Suction connection height [mm]278 mm
Suction connection pipe size [in]1 3/8 in
Suction connection size [in]1 3/8 in
Swept volume [cm3]103.5 cm³
Test dif [bar] [Max]37 bar
Test HP [bar] [Max]48.7 bar
Test LP [bar] [Max]33.3 bar
Torque earth [Nm]2 N-m
Torque power [Nm]3 N-m
Total height [mm]540 mm
Type designationCompressor
Viscosity [cP]32 cP
Winding resistance for three-phase compressors with identical windings [Ohm]1.05 Ohm

Danfoss Compressor Description

Danfoss air conditioning compressors reduce costs across the entire product lifespan in the application.
They support system design for high efficiency performance and for the use of alternative refrigerants for light commercial, commercial and industrial HVAC applications such as rooftops units, chillers, process cooling, packaged units etc.
Key Features
Wide range with wide application envelope suit varied applications

Innovative IDV technology further enhances part-load efficiency with minimal redesign costs

Bringing a new level of compressor robustness and system reliability

Manifold configurations with high reliability for staged modulations

Product Description
The Danfoss compressor range goes from small direct current hermetic compressors for mobile applications up to large scroll compressors for commercial air conditioning or industrial applications. Special versions, such as energy optimized compressors, variable speed compressors and compressors for solar applications are available. The range covers all common HFC, HCFC and CFC refrigerants as well as hydro-carbons for the smaller models. Danfoss compressors are used in numerous applications such as white goods, mobile refrigeration, light commercial refrigeration, commercial refrigeration and air conditioning.
Product Features
•SH scroll compressor for R410A HBP 380-400V/3~/50Hz and 460V/3~/60Hz Compressors are supplied with brazed connection pipes and internal overload protector
•1 Test Conditions: ARI standard test conditions Condensing temperature 544°C, superheat 111K, subcooling 83K
•2 Voltage Range: 340-440V/50Hz, 414-506/60Hz
•3 Evaporating temperature range: -10 to15°C (Condensing temperature = 55°C) For other conditions please see catalogue
Contact Information