Welcome, GuestSign InSign Up
Position - - / - - Detail

Round position glue dispenser

Product Details

Round position glue dispenser
Round position glue dispenser
Hot Melt Glue Machine With Piston Pump
Hot Melt Glue Machine
piston pump hot melt adhesive machine supplier
Specifications single stationfour-station eight locations 
working stationthe th cycles to all 
repeatability±0.02mm
drive systemStep motor + gear
Working table turning diameter220mm
capacity2 seconds /
Programm methodtouch screen
Program recording capacity100 sets, each set of 4000point (support usb disk copy))
Maximum speed of rotation1080 degrees/SEC
· Air demand requirements 0.4 0.6 Mpa pressure
input powerAC220V±10%;800W
 work environmentTemperature: 0 ~ 40 ℃ humidity: 20-90%
 boundary dimension450*500*600mm
Ontology is important (Kg)24Kg
Characteristics of the piston pump hot melt adhesive machine supplier
 
Convenient and practical operation
1. According to product size and glue fluidity, the glue discharge velocity and moving speed can be adjusted, rotation Angle can be adjusted, and the wire drawing rotation Angle can be prevented;
2. Easy to change up and down but accurate positioning;
3. The time can be adjusted according to the operation process to achieve the cycle work.
Efficient, high quality and stable
1. Take bulb bulb glue as an example, the efficiency of a machine is two to three people, which not only improves the efficiency of the enterprise, but also reduces the cost.
2. Stable operation of the machine and uniform and stable glue production ensure the consistency of products, and improve the market competitiveness of enterprises and products.
3. Fully automatic quantitative positioning and back suction function: accurate glue extraction and accurate positioning; The process of ordering a good product to go to another product will not lead to the leakage of glue space, which not only saves the glue but also does not dirty the machine table.
Strong universality:
Not only all bulb lamps, spotlights, lamp cups and lamps can be used, but also all round products that need to be coated with glue.
Suitable for industry: ball bubble lamp horn/motor/watch and other round products adhesion, packaging, coating, coating, etc.
Suitable for glue: glass glue, silicone rubber, silicone rubber, red glue, yellow glue, silver, uv curing glue, lubricating oil, epoxy resin, silicone resin and other materials

Contact Information

Contact PersonFred
Telephone0512-65564669
Fax Number0512-65488511
Websitehttps://www.oushida-gluemachine.com
Post Code
AddressNo.12 Hucundang Rd,Caohu Industrial Park, Xiangcheng District,Suzhou, Jiangsu, China
About Us - Contact Us - Privacy Policy - Daily Updates - Report Abuse