Welcome, GuestSign InSign Up
Position - - / - - Detail

EXPLOSION PROOF DIGITAL CAMERA

Product Details

EXPLOSION PROOF DIGITAL CAMERA
EXPLOSION PROOF DIGITAL CAMERA
EXPLOSION PROOF DIGITAL CAMERA
EXPLOSION PROOF DIGITAL CAMERA
EXPLOSION PROOF DIGITAL CAMERA
The conditions referenced in this section
relate specifically to hazardous area
applications and must be followed.
In accordance with clause 5.1 of EN 60079-1,
the critical dimensions of the flamepaths are:
• Contact the manufacturer for information on
the dimensions of the flameproof joints.
• The apparatus must only be used in areas
where there is low risk of impact.
• Do not charge battery pack in the hazardous
area.
• The battery must be removed from the
camera and charged in the CorDEX
Instruments ToughPIX II charging bay. Using
a different charging device can cause
damage and void certification.
• The ToughPIX II 2410 Series digital camera
incorporates a protected battery system
with a non-replaceable fuse. This fuse is
only to be replaced by CorDEX Instruments
or a CorDEX Instruments Approved Repair
Facility. Failure to do so will void the
certification.
• Ensure that the ToughPIX II 2410 Series
digital camera battery pack is secured
using the plug provided. If the plug is lost,
only replace with a plug of the correct size
and type. If in doubt, contact your nearest
CorDEX Instruments representative.
• The ToughPIX II 2410 Series digital camera
is manufactured from aluminium alloy; and
must contain less than 7% magnesium by
weight and incorporates toughened glass
windows. This should be taken into account
when considering the end use application.
• The ToughPIX II 2410 Series digital camera
cannot be maintained in the field and must
be returned to the manufacturer should
repair or maintenance be required.
• USB communications with the ToughPIX II
2410 Series digital camera must only occur
within the non-hazardous area.
• When replacing the battery pack, the screw
must be re-tightened to a torque of 1.5-4Nm
and the cover cap replaced.
• Only CorDEX battery pack CDX2400-011 shall
be used.
• Do not enable wifi in the hazardous area.

Contact Information

Contact PersonMike Jiang
Telephone86-18660761375
Fax Number865372486099
Websitehttp://www.chinacoalintl.com
Post Code272100
AddressNo.69 Huoju Road, New & High Zone,Jining City,Shandong Province,China
About Us - Contact Us - Privacy Policy - Daily Updates - Report Abuse