Welcome, GuestSign InSign Up
Position - - / - - Detail

Eccentric (Mechanical) Press Back To Front C Type

Product Details

Eccentric (Mechanical) Press Back To Front C Type
Welded C-Shape Steel Frame
The frame of ‘C-Frame’ press machines is fabricated from steel plates. Although these frames provide a better access to the die set area from the front and both sides of the press, the important factor of C-Gap, must be considered carefully.
In order to protect the C-gap from any distortion, besides designing the bodies based on engineering principles and benefiting from modern analyzing softwares, the necessary spots on the frame are reinforced to the point that the frame structure is placed within the international safety standards.
For both Dframee and Cframe presses After welding, the stress relieving process takes place. Then, the essential surfaces of the fixed and moving parts and the shafts will go through a careful machining process with boring machines.
The precise ram-to-plate parallelism and the vertical angle of the Ram’s movement towards the bolster plates, sustained for years due to the precision of the above procedures. Consequently, besides the high quality production, the durability of the press machines and dies will increase.

Contact Information

Contact PersonMr. Vahid Goudarzi
Telephone+989192668184
Fax Number
Websitewww.khavarpress.com
Post Code
AddressNo. 48, 4th St., Showra Blvd., Kamalshahr, Karaj 31 99 64 69 61,Alborz, Iran
Related ProductsKhavar Press Co.
  • Steel Structures
  • Automation Lines Pressing
  • Eccentric (Mechanical) Press Knuckle Joint
  • Front To Back Eccentric Presses D Type
  • Eccentric (Mechanical) Press Back To Front C Type
  • Special Hydraulic Press
  • Hydraulic Press H Type
  • Hydraulic Press C Type
  • Eccentric (Mechanical) Press H Type
  • Eccentric (Mechanical) Press C Type
  • Eccentric C2 Type Front to Back Press
About Us - Contact Us - Privacy Policy - Daily Updates - Report Abuse