Welcome, GuestSign InSign Up
Position - - / - - Detail


Product Details

The machine including frame, forming set, heating set, pneumatic system, water system, electrical system, etc.
Frame is welded by structural steel, As the base of other set.
Sealed chamber with an openable door front, welded with structural steel and metal sheet. A window at the rear of the chamber for heater in and out, when the heater out, A Board will cover the window. With sealer at all the opening.
Mould platform is made of structural steel and metal sheet, using gear, rack and pillar for the moving, there are vacuuming joint, water joint, air joint on it.
Middle mould frame is driven by pneumatic for clamping set. The clamping set can adjust by manual on the mould.
Upper mould frame is driven pneumatically, for the assisting mould and cutter.
Both side heating by the heater on the frame, 60*120/400W,pace 10*100,drived Pneumatically, the space of the upper heater and down heater 210mm..
If for the door thermoforming, the down heater can be closed

Contact Information

Contact PersonDavid Dan
Telephone+86 15029753392
Fax Number
Post Code
Address18# Binhai 2nd Road, Hangzhou Bay District, Ningbo, China
Related Trade LeadsBusiness Services / Consulting - China
About Us - Contact Us - Privacy Policy - Daily Updates - Report Abuse