Welcome, GuestSign InSign Up
Position - - / - - Detail

rubber lined Desulfurization pipe for power plant

Product Details

rubber lined Desulfurization pipe for power plant
Rubber brief Introduction of rubber lined pipe:

Our company's partner-Australian Rubber Company (hereinafter as the Australian side)keep pace with a unique "liquid formulations, solidifying with room temperature" recipe and production technology with rubber in the rubber industry, and the micro-structure of the rubber produced is almost not any damage, so that the products maintain a strong, high elasticity and natural features. This kind of rubber can be said "No other rubber can match" in the field of natural rubber, and it rules the roost nearly a hundred years so far.

Rubber Lined Pipe Features
1. Greatest impact resistance
Under very high impact the rubber will be deformed and absorb the kinetic energy of granule, and then rebound most of the energy to
granule in the form of return, in order to reduce the impact force and improve the life greatly.
2. Good wear resistance
Rubber lined can be chosen according to the need of anti-abrasion, and suitable for the environment with more anti-abrasion.
3. Fine anti-corrosion
Rubber lined can be carried out according to the need of anti-corrosion, and applicable to the environment with high corrosiveness.
Rubber lined can bear the anti-corrosion from all kinds of acid, alkali, salt, organic substance, seawater, waste water and so on, and can
be used in complicated and harsh chemical corrosive environment.
4. Adapting to wide range of temperature
Rubber lined steel pipe can be used within -40 degrees and 140 degrees for long term, and rubber lined layer will not be torn off the steel
frame due to temperature change.
5. Less running resistance can reduce energy consumption
The rubber layer of rubber lined pipe is smooth and flat.
6. Good steel pipe
Steel pipe is applied to the need of variety pressures, and can protect the rubber lined at the same time.
7. Light weight, easy to install, maintain and transport
The steel pipe only plays the role of supporting pressure, and it can be thinned to the minimum extent of supporting pressure, so its
weight is 20-30% lighter than ordinary steel. The lifetime of rubber lined steel pipe is umpty times more than the steel pipe, so the
investment is low during the average lifetime. Rubber lined pipe is light, and can save the bracket expense. The resistance depletion is
low and rubber lined pipe can save the running expense, so the general cost of rubber lined pipe is reduced greatly, and can save more
money for customers.
8. Recycling and reuse
The investment is disposable for steel pipe, and we can line rubber and keep using after repairing the steel pipe. Its lifetime will amount to
4 to 5 times that of metal pipe after lining rubber, and also save the money further


Physical Indices of Wear-resistant Rubber Lined Steel Pipe

ItemIndex
Breaking Strength of Lining Layer (MPa)≥16.5
Lining and Skeleton 180. Peeling Strength: (KN/m)≥8
Breaking Elongation of Lining Layer: (%)≥550
Given Tensile Stress of Lining Layer: (300%, MPa)≥9
Akron Abrasion Reduction of Lining Layer: (cm3/1.61km)≤0.1
Lining Hardness(Shore A)60±5
Change Rate of Breaking Strength with Hot Air Aging (70℃×72h, %)≤10Physical Indices of Anti-corrosion Rubber Lined Steel Pipe

ItemSoft RubberHard Rubber
Breaking Strength of Lining Layer (MPa)≥1517
Lining and Skeleton 180. Peeling Strength: (KN/m)≥77
Breaking Elongation of Lining Layer: (%)≥550400
Given Tensile Stress of Lining Layer: (300%, MPa)≥810
Akron Abrasion Reduction of Lining Layer: (cm3/1.61km)≤0.20.1
Change Rate of Breaking Strength with Hot Air Aging (70℃×72h, %)≤1010
Lining Hardness50~70>70>70
-48~8048~80
Change Rate of Breaking Strength Resistance to Acid and Alkali: (Room Temperature for 7 Days,%)≤101010
101010
101010
1. Specifications of Wear-resistant Rubber Lined Steel Pipe
①The Diameter Range of Wear-resistant Rubber Lined Pipe as the Following Chart
②The Thickness of Wear Resistant Rubber Lined 6mm Per Layer

Specifications Table of Wear-resistant Rubber Lined Pipe with Spiral Welded Pipe as Steel Frame

Steel Pipe
Specifications (mm)Theoretical Weight (kg/m)Operating Pressure (MPa)
Steel PipeRubber LinedRubber Lined Steel Pipe
φ219.1×632.036.1638.190~4.0
φ244.5×635.796.9342.720~4.0
φ273×640.017.7947.80~4.0
φ325×647.546.9354.470~2.5
φ377×655.408.1163.510~2.5
φ426×662.659.2171.860~2.5
φ457×667.239.9177.140~1.6
φ529×677.8911.5289.410~1.6
φ630×7108.0513.75121.80~1.6
φ660×7113.2314.43127.660~1.6
φ720×7123.5915.77139.360~1.6
φ820×8160.7017.99178.690~1.6
φ920×8180.4320.23200.660~1.6
φ1020×8200.1622.48222.640~1.0
Specifications Table of Wear-resistant Rubber Lined Pipe with Seamless Steel Pipes as Steel Frame

Steel Pipe
Specifications (mm)Theoretical Weight (kg/m)Operating Pressure (MPa)
Steel PipeRubber LinedRubber Lined Steel Pipe
φ108×512.702.1114.810~6.4
φ133×515.782.6718.450~6.4
φ159×518.993.2522.240~4.0
φ180×521.583.7225.30~4.0
φ219×631.524.5636.080~4.0
φ245×635.365.1340.490~4.0
φ273×6.542.725.7548.470~4.0
φ325×862.546.8569.390~4.0
φ377×981.677.9789.640~4.0
φ426×992.559.08101.630~4.0
φ480×9104.5310.29114.820~2.5
φ530×9115.6311.44127.070~2.5
φ560×9122.2912.09134.380~2.5
φ630×10145.3613.61158.970~2.5
2. Specifications of Anti-corrosion Rubber Lined Steel Pipe
①The Diameter Range of Anti-corrosion Rubber Lined Steel Pipe as the Following Chart
②The Thickness of Wear Resistant Rubber Lined 6mm Per Layer

Specifications Table of Anti-corrosion Rubber Lined Steel Pipe with Spiral Welded Pipe as Steel Frame:

Steel Pipe Specifications (mm)Theoretical Weight (kg/m)Operating Pressure
(MPa)
Steel PipeRubber LinedRubber Lined Steel Pipe
φ219.1×632.036.1638.190~4.0
φ244.5×635.796.9342.720~4.0
φ273×640.017.7947.8

Contact Information

Contact PersonCrystal
Telephone8603796515555888
Fax Number
Websitehttps://www.gmdu.net/corp-916123.html
Post Code
AddressNo.2 Penglai Road
About Us - Contact Us - Privacy Policy - Daily Updates - Report Abuse