Welcome, GuestSign InSign Up
Position - - / - - Detail

Load Change Over Switch ATS Power Switch for Generators

Product Details

Load Change Over Switch ATS Power Switch for Generators
Load Change Over Switch ATS Power Switch for Generators
Load Change Over Switch ATS Power Switch for Generators
Load Change Over Switch ATS Power Switch for Generators

Radin Electric provides ATS design engineering and full after sales support for a wide range of automatic transfer switch applications. We offer onsite electrical audits to assist in determining the correct product and installation to meet your exact needs and requirements.

About ATS

RDS2 series Auto changeover switch mainly used for distribution or electromotor network under 50Hz rated voltage 380V rated DC voltage 220V and rated current 16A to 3200A change over between main power and backup power mutual work as backup power system and city power and Generator power. At the same time it can act as disconnector for the un frequency ON and OFF circuit or lines.
Such product are widely used in the power transmission and distribution system and atomization system of important site which power off is not allowed such as fire fighting hospital bank high buildings etc.
RDS2 Auto Transfer Switch Equipment (ATSE) is integrate the switch and logical control together no need extra controller is an electromechanical integration auto transfer switch with voltage monitoring frequency monitoring communication port electrical and mechanical interlock functions etc. Can achieve auto control remote motor control and emergency manual control.
Operation is achieve by logical control board with various logical commands to managing the motor gear box running motor with spring energy storage instant release accelerating mechanism quickly open and close the circuit or make quick transferring through visible status to make sure the safety isolation greatly improved the every electrical and mechanical performance.
RDS2 ATS integral designed with metal case compact and strong.
RDS2 ATS the control part is with metal cover switch part with DMC case have strong dielectric performance protection performance and reliable operation safety.
The switch suitable for auto transfer between main power and backup power system or two load equipment's auto transfer and safe isolation etc.
The switch has beautiful appearance novelty small size complete functions is the best choose among the similar products.
RDS2 series product have passed the EMC test.

RDS2 Advantages

It adopted double complex contact/ horizontal pulling mechanism/micro motor energy pre storage and micro computer control technology basically come to Zero arc ( no arcing chamber)
Adopted reliable mechanical interlock and electric interlock executive unit adopt independent load disconnect switch it makes more reliable and safety
Adopt "Zero Position" Technology it can force to set to Zero Position under emergency situation ( cutoff two way power supply meet the fire linkage requirements
Load disconnect switch change over adopt singleness motor drive switch over smooth and reliable no noise little impact
The driving motor have instant current across only under the load disconnect switch change over stable working status no need to provide the working current outstanding energy saving.
Executive load disconnect switch have mechanical interlock make sure the Normal power and Reserve Power working reliable and no interference
Distinct ON and OFF position indicator padlock function etc. Make reliable and safe isolation between power supply and loading.
High security high automatization high reliability working life more than 8000 times
Electromechanical integration design accuracy change over flexible smoothly adopt international advanced logical control technology high anti interference ability no interference outward.
Have main power ON backup power OFF main power OFF backup power ON main and backup power OFF three working mode (I o II)
Easy installation control circuit adopt plug type terminal connection
Four operating functions Emergency manual motor remote control emergency OFF under auto control status auto control operation.

Basic Type Switch Control Characteristic

Suitable for two way main and backup power system auto transfer with auto recovery
Can expand functions by outer connection
Auto Remote Manual control functions
Delay 0. 5s signal detect avoid miss actuation
Under Auto control status have "O" Position remote control
Can with RS 485 communication port ( optional) according to customer required.

Dlivery Terms
Shipment Express Air express

We've got CE TUV KEMA CCC certificate for ATS which also meets the ISO9001 standard and the factory has go through SGS test.

1. What's the warranty term
24 Monthes.
2. How long does it take to deliver my goods
Normally samples can be delivered in 2 days. Customer designed sampleswill be delivered in 3 7 days.
3. Do you offer sample
Yes we offer sample order for customer to test the goods.
4. What kinds of payment terms do you accept
We offer kinds of payment ways foe customer to chose from. T/T L/C Aliexpress Western union etc.
5. What if there's quality peoblem
We offer replacement for the goods as soon as there is a quality problem with the goods and the fright is on our account to cut down the customer's loss to the lowest.

We are sure any of your questions will get our prompt reply just leave the message

Contact Information

Contact PersonLena Yang
Telephone+86(577) 57156212
Fax Number+86(577) 57156212
Post Code325600
AddressNo.319 Latitude 18th Road, Economic Development Zone, Yueqing City, Zhejiang, China.
About Us - Contact Us - Privacy Policy - Daily Updates - Report Abuse