Welcome, GuestSign InSign Up
Position - - / - - Detail

LCD Display ATS Dual Power Automatic Transfer Switch

Product Details

LCD Display ATS Dual Power Automatic Transfer Switch
LCD Display ATS Dual Power Automatic Transfer Switch
LCD Display ATS Dual Power Automatic Transfer Switch
LCD Display ATS Dual Power Automatic Transfer Switch
LCD Display ATS Dual Power Automatic Transfer Switch

Product Name RDS3 Series Dual Power Automatic Transfer Switch
Type PC Type
Material Of Cover PC
Standard GB/T14048. 11
Poles 3P/4P
Current 16A 630A
Controller Type A Basic type single phase monitor
B Standard type three phase monitor fire fighting generator control
C Intelligent type three phase monitor fire fight generator control LCD display
Use Category AC 33B

Type RDS3 125 RDS3 250 RDS3 630
Rated Working current (A) le 16A 125A 140A 250A 315A 630A
Rated Working voltage (V) Ue 400 400 400
Rated Insulation voltage (V) Ui 800 800 800
Rated short time withstand current (KA rms) Icw 10KA (200MS) 10KA (200MS) 25KA (200MS)
Rated short circuit making capacity (KA peak) Icm 20KA 30KA 50KA
Rated control power supply voltage (V) Us 230V/50HZ 230V/50HZ 230V/50HZ
Contact transfer time (s) 1. 5 1. 8 2

About ATS

RDS3 Series PC class dual power Auto transfer switch mainly used in two way power supply system with rated voltage below 400V AC 50/60Hz rated current up to 630A when one power supply abnormal then it transfer between two power supply system to ensure the power supply reliablity and safety.
The ATS have " Main Power" "Backup Power" And "Two way OFF" Positions with higher breaking and making capacity it not only can meet normal load transfer but also can meet high inductive impedance or big motor load transfer meanwhile due to have high short time withstand current capacity no need special SPCD doesn't affect the selective of inside circuit meanwhile it also can meet the application at big capacity power supply side.

Product confirm to GB/T14048. 11 Standard

RDS3 Advantages

a. Control power voltage AC 230V
b. Auto Transfer Auto transfer auto recovery auto transfer no auto recovery power grid generator
c. Manual transfer Manual main power manual backup power manual OFF
d. Isolation lock Off position have isolation function also can padlock locked
e. Generator control Generator start and stop
f. Fire linkage With passove fire linkage signal to switch OFF the device with one set passive NO feedback contact.
g. Display mode Mechanical indication device ON/OFF status operating mode
LED device ON/OFF status power status
LCD device ON/OFF status power status data setting
h. Setting mode Key press operation Chinese/English display interface can set the working mode low voltage value over voltage value delay time auto transfer mode etc.
i. Power monitoring ABC three phase over voltage (240 290v adjustable)
ABC three phase low voltage (150 200v adjustable)
ABC three phase missing monitor
j. Delay time Transfer delay (0 300s adjustable)
Recovery delay (0 300s adjustable)
Generator start stop delay (0 300s adjustable)
k. Mounting mode Integated mounting

Controller Type

A Basic type single phase monitor
B. Standard type threee phase monitor fire fighting generator control
C Intelligent type three phase monitor fire fighting generator control LCD display
D Intelligent type three phase monitor fire fighting generator control split LCD display

Working conditions

a. Ambient temperature 20 C 40 C 24 hours average not more than 35 C
b. Atmospheric conditions humidity not more than 50 at max. 40 C higher humidity is allowed at lower temperature at most wet month the average max humidity is 90 at the average min temperature 25 C and have considered the condensation on the product surface due to temperature variation
c. Altitude Not more than 2000m
d. Pollution Class The installation site environment pollution class 3


Dlivery Terms

Shipment Express Air express

We've got CE TUV KEMA CCC certificate for ATS which also meets the ISO9001 standard and the factory has go through SGS test.

FAQ
1. What's the warranty term
24 Monthes.
2. How long does it take to deliver my goods
Normally samples can be delivered in 2 days. Customer designed sampleswill be delivered in 3 7 days.
3. Do you offer sample
Yes we offer sample order for customer to test the goods.
4. What kinds of payment terms do you accept
We offer kinds of payment ways foe customer to chose from. T/T L/C Aliexpress Western union etc.
5. What if there's quality peoblem
We offer replacement for the goods as soon as there is a quality problem with the goods and the fright is on our account to cut down the customer's loss to the lowest.

We are sure any of your questions will get our prompt reply just leave the message

Contact Information

Contact PersonLena Yang
Telephone+86(577) 57156212
Fax Number+86(577) 57156212
Websitehttps://www.gmdu.net/corp-915111.html
Post Code325600
AddressNo.319 Latitude 18th Road, Economic Development Zone, Yueqing City, Zhejiang, China.
About Us - Contact Us - Privacy Policy - Daily Updates - Report Abuse