Welcome, GuestSign InSign Up
Position - - / - - Detail

Wire Feeding machine

Product Details

Wire Feeding machine
Wire Feeding machine
Remso Control Technologies always take a heed of purchaser of Ferro Calcium Silicon (FeCaSi) One, Two, Four and Six strand Cored wire Injection System with automatic software PLC control in to Ladle Refining Furnace, VD, VOD, EAF, LF, Tundish, CCM for steel treatment, automatic pouring lines and Ladle Refining Furnace into the melt steel bath.
Remso Control Technologies is continuously working in the field of steel processing and equipment’s for steel products refinement and growth in steel technologies by providing better time process, profitable capital productivity and resilience equipment furnishment. Remso’s Wire Injection Machine soothe the melt shop by feeding speed, feed length and with reset button on the control cabinet automatic or manual feeding replaceable, lower part of telescope pipes is made of heat-resisting steel. Cored Wire Injection Machine of Remso can feed Inject cored wire, solid Aluminum wire SiCa, FeCa, Mg, Mn, Carbon, Sulphur, Boron etc. to control the shape of inclusion and to produce cleanness and cold ductility for wire drawing.
Operation of Feeder machine posses as unit of telescopic pipes runs in automatic cycle of wires feeding. The upper position is the initial position called home position. After choosing the icon “START”, the telescope comes down to the lower position and then the cycle of wire(s) feeding starts. After finishing of feeding by the last wire, the telescope hoists to its upper, home position. This was the following operation process also the operating process can be changed or tailored if, or, according to customer plant process operationality.
Assurance of each and every assemble equipment in wire injector machine is tested at every condition and trusted because of accurate feeding for optimum use of wire, robust Construction with minimum maintenance, cost economics, possibilities for high degree of automation. Equipments assembled description is given below:-
Pinch Roll: - Providing tension to the cored wire in to downstream position. The rolls can be made up of steel, aluminum, brass, bronze etc. and as per strand there are 3 pinch rolls are needed.
Gear Box: - Each injector machine is having cylindrical gearing with exact inclined measurement of teeth that driven by D.C motor. Casing of gear box is of mild steel that will protect the gears from damping, vibration and heating elements.
Automation and Guidance of Wire: - With robust hardware and software system which can be controllable from 100m distance with programmable logic controller (PLC) with input and output limit switches and easily shut down button in case of emergency. Although the cored wire is guided through funnel that constraints the direction of cored wire.
Belt and Pulleys Transmission System: - Avoid slipping of wires that during the power transmission with massive hulk working system. Belt and pulleys are tested at FOS 3 from the branded supplier.

Contact Information

Contact PersonMadan Kumar
Fax Number+91-120-4295183
Post Code201308
About Us - Contact Us - Privacy Policy - Daily Updates - Report Abuse