Welcome, GuestSign InSign Up
Position - - / - - Detail

Eaton DS7 Soft Start Controller

Product Details

Eaton DS7 Soft Start Controller
A&S Electric Motors Co., Ltd can provide Eaton soft starters as follows.

Eaton S701 Soft Starter:

The S701 line of soft start controllers is specifically designed to be a low cost option for soft starting small (15 hp and down) three-phase motors. The S701 controls current on two of three motor phases to control the torque being applied to the motor, allowing for smooth starting of a motor. It is designed to be used with a manual motor starter or a full voltage starter, and provides the necessary overload protection as well as line isolation for the motor
S701C03N3S
S701D03N3SS701C25N3S
S701E03N3SS701E25N3S
S701G03N3SS701G25N3S
S701C15N3SS701C25N3BP
S701E15N3SS701E25N3BP
S701G15N3SS701G25N3BP
S701E25B3SS701C25B3S

Eaton Soft Starter S511E10N3D
Eaton Soft Starter S511E10N3S

Eaton Soft Starter DS6-34DSX041N0-N
Eaton Soft Starter DS6-34DSX055N0-N
Eaton Soft Starter DS6-34DSX068N0-N
Eaton Soft Starter DS6-34DSX081N0-N
Eaton Soft Starter DS6-34DSX099N0-N
Eaton Soft Starter DS6-34DSX134N0-N
Eaton Soft Starter DS6-34DSX161N0-N
Eaton Soft Starter DS6-34DSX196N0-N

DS7 Soft Start Controller:

DS7 easily fits in place of existing soft starters, wye-delta starters, or across-the-line NEMA and IEC starters. The Voltage Ramp Start method provides a voltage ramp to the motor, for constant torque increase. Users set initial voltage values and the duration of the ramp to full voltage conditions. Soft Stop allows for a controlled stopping of load when a stop-time greater than the coast-to-stop time is desired; for high friction loads where a sudden stop may cause system damage.

DS7-340SX004NO-NDS7-342SX012NO-N
DS7-342SX004NO-NDS7-340SX016NO-N
DS7-340SX007NO-NDS7-342SX016NO-N
DS7-342SX007NO-NDS7-340SX024NO-N
DS7-340SX009NO-NDS7-342SX024NO-N
DS7-342SX009NO-NDS7-340SX032NO-N
DS7-340SX012NO-NDS7-342SX032NO-N


Eaton S611 Soft Starter:
S611A065N3SS611A052
S611A077N3SS611A065
S611B099N3SS611A072
S611B125N3SS611B099
S611C156N3SS611B125
S611C180N3SS611C156
S611D242N3SS611C180
S611E302N3SS611D242
S611E361N3SS611E302
S611F414N3SS611E361
S611A052N3SS611F414


The Eaton S611 is an innovative, economical soft starter combining advanced functionality, unsurpassed configuration flexibility, and an extremely comprehensive user interface. It is available in both open and enclosed control configurations to meet the needs of the commercial construction and OEM segment.

Eaton S801+ Soft Starter:
S801+N66N3SS801+V36N3S
S801+R10N3SS801+V42N3S
S801+R13N3SS801+V50N3S
S801+R18N3SS801+V65N3S
S801+R24N3SS801+V72N3S
S801+R30N3SS801+V85N3S
S801+U36N3SS801+V10N3S
S801+U42N3SS801+T18N3S
S801+U50N3SS801+T24N3S
S801+T30N3SS801+N37N3S


Eaton S811+ Soft Starter:
S811+N37N3SS811+U50N3S
S811+N66N3SS811+V36N3S
S811+R10N3SS811+V42N3S
S811+R13N3SS811+V50N3S
S811+T18N3SS811+V65N3S
S811+T24N3SS811+V72N3S
S811+T30N3SS811+V85N3S
S811+U36N3SS811+U42N3S
S811+V10N3S

Features:
Compact, easy to program and easy to install, the S811+ line of soft starters is ideally suited for open, enclosed and motor control center applications. The S811+ provides an easy to use Digital Interface Module allowing users to modify control parameters, enable/disable protections, set communication variables, monitor system parameters such as line voltages and currents, and access the fault queue.

Contact Information

Contact PersonLu Deng
Telephone+86-28-65856704
Fax Number+86-28-86129221
Websitehttp://www.motors8.com
Post Code610000
Address#10 West 2nd Street, Wuhou District,Chengdu,Sichuan,China
About Us - Contact Us - Privacy Policy - Daily Updates - Report Abuse