Welcome, GuestSign InSign Up
Position - - / - - Detail

Inrush Current Limiting Power NTC Thermistors

Product Details

Inrush Current Limiting Power NTC Thermistors
Power NTC thermistor limit inrush current when the power is first turned on, functioning as a power resistor which drops from a high cold resistance to a low hot resistance when heated by the current flowing through, resistance remains negligible low during continuous operation.

Power NTC thermistor can be a cost effective device to limit the amount of inrush current in a switching power supply or other devices when the power is first turned on. Power NTC thermistor limits surge current by functioning as a power resistor which drops from a high cold resistance to a low hot resistance when heated by the current flowing through it.
Inrush-current limiters power NTC thermistor protect circuits from undesirably high currents, suppressing high inrush current surges, while its resistance remains negligible low during continuous operation. Thanks to their low resistance in the operating state, Power thermistor have a considerably lower power dissipation than the fixed resistors frequently used for this application.

Inrush Current Limiting Power NTC Thermistor Application
limiting surge current, suitable for the protection of switch mode power supply, UPS power, transformers, motors, various electric heating utensil, energy saving lights, ballast, various power circuit, amplifiers, colored displayer, monitors, color TV, filament protection, etc.
Power thermistor components can also be used for the soft starting of motors, for example in vacuum cleaners with continuous currents of up to 20 A.

Inrush Current Limiting Power NTC Thermistor Advantages:
·Low cost solid state device for inrush current suppression.
·Minimize line current distortion and radio noise.
·Protect switches, rectifier diodes and smoothing capacitors against premature failures.
·Prevent fuse from blowing in error.

Inrush Current Limiting Power NTC Thermistor Features:
·Resin coated disk thermistor with uninsulated lead-wires.
·Suitable for both AC and DC circuits up to a voltage of 265 V(rms).
·Wide range of resistance, current and dimension.
·Excellent mechanical strength.
·Suitable for PCB mounting.

Contact Information

Contact PersonRosa Yu
Telephone86-755-26570111
Fax Number86-755-26571122
Websitehttp://www.amwei.com
Post Code518057
Address11-502, Songpingshan, Langshan Road, North Area, Shenzhen High-tech Industrial Park, Nanshan, 518057, Shenzhen, Guangdong, P.R China.
Related ProductsAMWEI Thermistor
  • Ring lug NTC thermistor surface temperature probes
  • Metal Housing Threaded Fitting NTC thermistor temperature probes
  • Threaded stainless steel tube thermistor temperature sensor probe
  • Meat probe
  • Flanged stainless steel NTC thermistor temperature sensor with 2 mounting holes
  • Stainless steel oven cooker roaster toaster thermistor temperature sensor probe with 1 mounting hole
  • Copper tube NTC thermistor temperature sensor probe
  • Threaded Pipe Tanks Vessel PTC thermistor heater for automotive vehicles carburetor heating, water boiler
  • KTY84 KTY83 KTY81 Sensor Replacement-AMWEI Linear Silicon PTC Thermistor Temperature Sensors
  • PTC Thermistors Limit Temperature Sensors for Motor protection Single Sensors & Triple Sensors
  • PTC Thermistor for Telecom Over-current Protection
  • PTC Thermistors Limit Temperature Sensors
About Us - Contact Us - Privacy Policy - Daily Updates - Report Abuse