Welcome, GuestSign InSign Up
Position - - / - - Detail

AMWEI PTC Thermistor current Protector

Product Details

AMWEI PTC Thermistor current Protector
PTC thermistors current protector, also called PTC thermistor resettable fuses, protect load against over-current, overload, short circuit. No need for replacement, resume protective function after a short cooling-down time.

Ceramic PTC (positive temperature coefficient) thermistors are used instead of conventional fuses to protect load, such as motors, transformers, or electronic circuit, against overcurrent for circuit protection. PTC thermistor protector not only respond to inadmissibly high currents but also if a preset temperature limit is exceeded. PTC thermistor over-current protector limits the power dissipation of the whole circuit by increasing their resistance and thus reducing the current to a harmless residual value. In contrast to conventional fuses, PTC thermistor resettable fuses do not have to be replaced after elimination of the fault but resume their protective function immediately after a short cooling-down time.

PTC Thermistor Over-current Protector Application

It applies in the over-current overload and short circuit protection of transformers, battery charger, switches, switch power supply, adaptor, meter, instrumentation, apparatus, electronic coils, control panels, air conditioner, automotive electron, etc.

Operating Principle of PTC Thermistor for Overload Over-current Protection

The operating principle is as indicated in the following. When a circuit is in the normal status, the current through PTC is lower than the rated current and PTC thermistor protector is in the normal state with small resistance value, which will not affect the normal operation of the protected circuit. In case of some fault in the circuit and the current is greater than the rated current, the PTC thermistor protector will become hot quickly and present a high resistance state, which sets the circuit relatively "off" to protect the circuit from damage. After the fault is removed, PTC thermistor protector will automatically restore its low resistance state and the circuit will resume normal operation.

Normally, when PTC thermistor is used as an overcurrent protection component, it is preferred to select maximum operating current, maximum operating voltage and proper specifications. Furthermore such factors should be taken into consideration as the dimensions of the components, rated zero-power resistance, operating temperature range, etc.

Contact Information

Contact PersonRosa Yu
Telephone86-755-26570111
Fax Number86-755-26571122
Websitehttp://www.amwei.com
Post Code518057
Address11-502, Songpingshan, Langshan Road, North Area, Shenzhen High-tech Industrial Park, Nanshan, 518057, Shenzhen, Guangdong, P.R China.
Related ProductsAMWEI Thermistor
  • Ring lug NTC thermistor surface temperature probes
  • Metal Housing Threaded Fitting NTC thermistor temperature probes
  • Threaded stainless steel tube thermistor temperature sensor probe
  • Meat probe
  • Flanged stainless steel NTC thermistor temperature sensor with 2 mounting holes
  • Stainless steel oven cooker roaster toaster thermistor temperature sensor probe with 1 mounting hole
  • Copper tube NTC thermistor temperature sensor probe
  • Threaded Pipe Tanks Vessel PTC thermistor heater for automotive vehicles carburetor heating, water boiler
  • KTY84 KTY83 KTY81 Sensor Replacement-AMWEI Linear Silicon PTC Thermistor Temperature Sensors
  • PTC Thermistors Limit Temperature Sensors for Motor protection Single Sensors & Triple Sensors
  • PTC Thermistor for Telecom Over-current Protection
  • PTC Thermistors Limit Temperature Sensors
About Us - Contact Us - Privacy Policy - Daily Updates - Report Abuse