Welcome, GuestSign InSign Up
Position - - / - - Detail

Tuning Fork Level Switch

Product Details

Tuning Fork Level Switch
The AMTS-TL series tuning fork level switch is liquid level switch, which is brought to its resonance frequency by means of piezoelectric crystals drive. If the tuning fork is covered by liquid
or solidity, this frequency will change. The electronics of the monitor the resonance frequency and then output a switching value, in this way, to alarm and control the liquid level.

-Powerful adaptability:
Different electrical parameters and densities of the materials have no influence on themeasurement. The extreme conditions, such as scale formation, agitation, on flow, bubbles, vibration,medium,viscosity, high temperature and high voltage also make no difference on the
-Maintenance free: The detection procedure of the product is done by electronic circuit and
there is no mobile component, thus it is maintenance free once being installed and put into
-Adjustment free: The detection of the product is not influenced by electrical parameters and densities of the mediums measured, thus no adjustment on site is required no matter which liquid is measured.

Power Supply: AC 220V / DC 24V
Operating Temperature: Fork: -30-100℃(High Temperature Type:-30-150℃)
Operating Pressure: ≤2MPa
Fluid Density: 0.6g/cm3 (In minimum)
Action Point: Vertically insert into water about 25mm
Start Time: about 3sec
Response Time: about 1sec
Output : SPST /DPDT
Output Delay Time: 1-20sec
Sensitivity: 10 grades can be set
Consumption: ≤1W
Process Connection: R1//G1 (Can be costumed-made, thread must ≥1”)
Electric Interface: M20×1.5 (Can be costumed-made)
Explosion Proof: ExdIICT6
Standard length: 130mm

Contact Information

Contact PersonHelen Yang
Fax Number+86-010-88083809
Post Code101100
AddressNo.20, Yangzhuang Road, Tongzhou District
About Us - Contact Us - Privacy Policy - Daily Updates - Report Abuse