Welcome, GuestSign InSign Up
Position - - / - - Detail

PTFE molding powder for PTFE film

Product BrandDy
CategoryChemicals - Alkyl
Product TagsTeflon Powder

Product Details

PTFE molding powder for PTFE film
PTFE molding powder for PTFE film
No.Item DF-16
Grade AQualified
1Smoothness & CleanessWhite sheet surface, even texture, no residue quantity (≤0.5mm)≤2
2Tensile Strength,(Mpa)2927.4
3Elong At Rupture(%)≥300280
4Volume Density,(g/L)300-450
5Residue on sieve (65 μ m)(%)≤3
6Moisture Content.(%)≤0.04
7Melting Point(℃)372±5
8Stand Relative Density 2.130-2.160
9Thermal Inst, Index ≤20
10Electric Strength(KV/MM)≥10060
11For checkExecute according to requirement of HG/T2903-1997
12For processFor Molding
13usageThe resin are mainly used as the general required electric
source, which is suitable for making film, the products of thin
wall, seal, gasket, club, panel, tube, axletree, seal ring, and
loop ,filling compounds. etc.
14Packing, Storage Transportation 1.PTFE is packed in double layer PVC bags inside and in hard
circular barrels outside, on the barrels, there should be
attached label and quality certificate, on which there are
brand, trademark, executive criterion. type, grade, lot NO. and net content, pack date, checker, packager.
2.PTFE should be stored in clean dry warehouse to prevent from
dust, moisture, foreign matters etc.
3.The products are transported according to non-dangerous
products, Heat, moisture, freezing and strong shock should be avoided during transportation. Over-bumpiness and
compression is apt to make the resin bind together.

Contact Information

Contact PersonNancy Zhao
Telephone+86 533 8226773
Fax Number+86 533 8226773
Post Code256400
AddressNo.2277 Zhongxin Street Huantai,Zibo,Shandong,China
About Us - Contact Us - Privacy Policy - Daily Updates - Report Abuse