Welcome, GuestSign InSign Up
Position - - - List

5E-CYP Cross-Belt Sampler

5E-CYP Cross-Belt Sampler
5E-CYP Cross-Belt Sampler is used for extracting samples from the moving streams on the middle position of the belt conveyor. Significance of Mechanical Sampling: Full Section Samp...
Brand5ETagsCross-Belt Sampler

5E-APS Automatic Sample Preparation System

5E-APS Automatic Sample Preparation System
5E-APS Automatic Sample Preparation System is designed to produce specified coal samples automatically with unattended operation, which applies to coal sample preparation in power ...
Brand5ETagsSample Preparation System

5E-HA60×50 Hardgrove Grindability Index Tester

5E-HA60×50 Hardgrove Grindability Index Tester
5E-HA60×50 Hardgrove Grindability Index Tester is designed to measure the grindability of coal, which is widely applied in coal industry, power plant ,metallurgy and chemical industry.
Brand5ETagsHGI

5E-PL300B Plastometric Indices Determinator

5E-PL300B Plastometric Indices Determinator
5E-PL300B Plastometric Indices Tester (aslo called Spozhnikov Plastometer) is used to determine the plastometric indices of bituminous coal (maximum thickness of plastic layer Y, f...
Brand5ETagsPlastometric Indices Determinator

5E-AF4115 Ash Fusion Determinator

5E-AF4115 Ash Fusion Determinator
5E-AF4115 Ash Fusion Determinator is used to determine ash cone deformation temperatures in coal ash, biomass ash and mold powders automatically, which are critical to the boiler functioning properly and to avoid slagging and fouling.
Brand5ETagsAFT

5E-MAG6700 Proximate Analyzer - TGA

5E-MAG6700 Proximate Analyzer - TGA
5E-MAG6700 Proximate Analyzer (Thermogravimetric Analyzer, TGA) is used to determine the moisture, ash, volatile matter in coal, coke, biomass, limestone and iron ore, food and feedstuffs by thermogravimetric method.
Brand5ETagsTGA

5E-MAC6710 Proximate Analyzer - TGA

5E-MAC6710 Proximate Analyzer - TGA
5E-MAC6710 Proximate Analyzer(Thermogravimetric Analyzer, TGA) is used to determine the moisture, ash, volatile matter and fixed carbon in coal and coke. It can also determine resi...
Brand5ETagsTGA

5E-AS3200B Automatic Coulomb Sulfur Analyzer

5E-AS3200B Automatic Coulomb Sulfur Analyzer
5E-AS3200B Automatic Coulomb Sulfur Analyzer is used to determine the total sulfur content in coal and liquid fuel. A sample is combusted in a dry air atmosphere; the gases evolved...
Brand5ETagsCoulomb Sulfur analyzer

5E-IRS3600 Automatic Infrared Sulfur Analyzer

5E-IRS3600 Automatic Infrared Sulfur Analyzer
5E-IRS3600 Automatic Infrared Sulfur Analyzer is used to determine the total sulfur content by infrared absorption, which is widely applied in power plants, coal mines, metallurgy,...
Brand5ETagsSulfur analyzer

5E-CS902C Inorganic Carbon Sulfur Analyzer

5E-CS902C Inorganic Carbon Sulfur Analyzer
5E-CS902C integrates the high-frequency combustion and infrared analysis. It has wide analysis ranges, various sample types, and high analysis accuracy. Instrument is equipped with...
Brand5ETagsCarbon sulfur analyzer

5E-HGT2320 Automatic Mercury Analyzer

5E-HGT2320 Automatic Mercury Analyzer
5E-HGT2320 Automatic Mercury Analyzer is used to determine the mercury in liquid and solid material such as coal, coal fly ash, soil, sludge, sediment, ore, mineral, foodstuff, waste water and fodder.
Brand5ETagsMercury analysis

5E-C5508 Automatic Calorimeter

5E-C5508 Automatic Calorimeter
5E-C5508 is used to determine the calorific value of solid and liquid combustibles including oil, coal, coke, foodstuffs and biomass products. The calorific value is a crucial char...
Brand5ETagscalorific value, coal analysis

EZ-10 Computer Control Torsion Testing Machine Of Bone Screw

EZ-10 Computer Control Torsion Testing Machine Of Bone Screw
EZ-10 Computer Control Torsion Testing Machine Of Bone Screw Main Introduction EZ-10 Computer control torsion testing machine is mainly used in the torsion test of metal and nonmetal materials, mechanical parts.
BrandchendaTagsComputer Control Torsion Testing Machine Of Bone Screw

EZW-50Nm Computer Control Material Torsion Test Machine

EZW-50Nm Computer Control Material Torsion Test Machine
一.Standard GB/T 10128 《Test Method For Torsion Of Metallic Materials At Room Temperature》, JJG 269《Verification Regulation Of Torsion Testing Machine》, JB/T9370-1999《Technical Conditions Of Torsion Testing Machine》.
BrandchendaTagsEZW-50Nm Computer Control Material Torsion Test Machine

JBW-300 Computer control impact testing machine

JBW-300 Computer control impact testing machine
JBW-300 Computer control impact testing machine JBW-300 computer control impact testing machine is ideal testing equipment , it is used to measure the metal material to resist impact loads under the dynamic properties.
BrandchendaTagsJBW-300 Computer control impact testing machine

JB-300 Semi-Automatic impact testing machine

JB-300 Semi-Automatic impact testing machine
JB-300 Semi-Automatic impact testing machine Main Functions: ●It mainly used to determine the Semi-automatic-impact capability of ferrous metal materials with high toughness, esp...
BrandchendaTagsJB-300 Semi-Automatic impact testing machine

MRH-5 High speed Ring-Block Wear Testing Machine

MRH-5 High speed Ring-Block Wear Testing Machine
MRH-5 High speed Ring-Block Wear Testing Machine Brief introduction ●This machine is mainly applied for simulating evaluation for kinds of lubricant, grease’s extreme compression capacity and anti-confusion capacity.
BrandchendaTagsMRH-5 High speed Ring-Block Wear Testing Machine

Computer controlled hydraulic four-ball friction tester MRS-10A

Computer controlled hydraulic four-ball friction tester MRS-10A
Computer controlled hydraulic four-ball friction tester MRS-10A Brief Introduction: The machine is used to evaluate the loading capacity of lubricants in the process of sliding friction o na contact point under very high pressure.
BrandchendaTagshydraulic four-ball friction tester MRS-10A

Computer controlled vertical universal friction and wear tester MMW-1

Computer controlled vertical universal friction and wear tester MMW-1
MMW-1 is a Multi-specimen friction and wear testing machine. It is designed for simulating, evaluating and testing almost all kinds of oil (high-class serial hydraulic oil, lubrica...
BrandchendaTagsuniversal friction and wear tester

YAW-300/600C Automatic Cement Compression Testing Machine

YAW-300/600C Automatic Cement Compression Testing Machine
This series machine is used for direct compression test for materials, especially suitable for those hard brittle materials.The machine is widely used in construction material tests like concrete, wood, carbon steel and rocks.
BrandchendaTagsAutomatic Cement Compression Testing Machine
About Us - Contact Us - Privacy Policy - Daily Updates - Report Abuse